Sách ngoại văn giá rẻ, chưa đến 1/10 giá bìa (3) ( bản in hoặc photo)

31. Concepts in Enterprise Resource Planning / Ellen F. Monk, Bret J. Wagner

Boston, Mass.: Course Technology Cengage Learning, 2009.

272 trang x 300 = 81.600 vnd

In today’s cutting-edge business world, enterprise resource planning (ERP) software plays a critical role. By bringing a company’s many different functions together into one large integrated system, it creates an abundance of opportunities for growth and increased productivity. However, mastery of ERP is central to success and Concepts in Enterprise Resource Planning, Third Edition, provides the perfect tool for making sense of this vastly important technology. The book examines enterprise software in general and shows readers how ERP software can improve the functions of a company, how it can streamline operations, and how the functional areas of any package relate to each other. The third edition has been updated to reflect the very latest trends and updates in ERP software. With all new sidebar cases and real-world examples throughout, this text will not only provide a thorough introduction to the world of enterprise resource planning, but will also prepare readers for success in today’s marketplace.


32. DSP System Design: Using the TMS320C6000 / Nasser Kehtarnavaz, Mansour Keramat

Upper Saddle River, N.J.: Prentice Hall, 2001.

 273 trang x 300 = 81.900 vnd


Digital signal processing (DSP) has experienced an enormous growth in the last 20 years. Nowadays, DSP systems such as cell phones and high-speed modems have become an integral part of our lives. The three major components of DSP systems are DSP processors, and analog-to-digital converters, and digital-to-analog data converters. DSP processors are expected to play a major role in the next generation of high-speed communication systems and networks. The TMS320C6000 processor family has been introduced by Texas Instruments to meet such high-performance demands.

This book has evolved from a DSP laboratory course I have taught at Texas A&M University. The objective of the book is twofold: (a) to provide DSP system designers with the knowledge needed to select an appropriate data converter for a specific DSP system of interest and (b) to provide the know-how for the implementation and optimization of computationally intensive signal-processing algorithms on the family of I’MS320C6x DSP processors. The book is also written for the purpose of providing a textbook for a real-time DSP laboratory course using the TMS320C6x DSP Such a course is meant to be a follow-up to a first course in DSP The material presented here is written primarily for those who are already familiar with DSP concepts and are interested in designing DSP systems based on TI data converters and TI C6x DSP products. Note that a great deal of the information in the book appears in the TI reference manuals on the C6000 DSP family 9-19. However, this information has been restructured, modified, and condensed to be used for teaching a DSP laboratory course in a semester period. It is recommended that these manuals be used in conjunction with the book in order to make full use of the information presented.

A data converter Matlab toolbox and eight lab exercises are discussed and included on an attached CD to take the reader through the entire process of analog-to-digital signal conversion and C6x code writing. As a result, the book can be used as a self-study guide for designing C6x-based DSP systems. The chapters are organized to create a close correlation between the topics and lab exercises if they are used as lecture materials for a DSP lab course. Knowledge of the C programming language and Matlab is required for understanding and performing the lab exercises. ACKNOWLEDGMENTS

We would like to express our gratitude to Texas Instruments for allowing us to use the materials in their manuals. All the figures marked by t in their captions are redrawn or modified courtesy of Texas Instruments. We wish to extend our appreciation to Gene Frantz at Texas Instruments, who brought to our attention the need for writing this book. The book would not have materialized without his encouragement. We are grateful to Leon Adams and Maria Ho at Texas Instruments, who provided the necessary administrative support to write the book in a short period of time. We would like to thank Tom Robbins and Alice Dworkin at Prentice Hall for expediting the publication process. Among many students who provided feedback on the lab exercises, we are deeply indebted to Sooncheol Baeg, who, as the laboratory teaching assistant, made many useful suggestions.

Nasser Kehtarnavaz

From the Back Cover

A data converter MATLAB toolbox and eight lab exercises are discussed and included on the enclosed CD to take the reader through the entire process of analog to digital signal conversion and C6000 code writing. As a result, the book can be used as a self-study guide for designing C6000-based DSP systems. To facilitate use as lecture materials for a real-time DSP laboratory course, the chapters are organized to create a close correlation between the topics and lab exercises. Knowledge of the C programming language and MATLAB is required for understanding and performing the lab exercises.


33.Ecology: Concepts and Applications / Manuel C. Molles

Boston: McGraw-Hill Higher Education, 2008.

 608 trang x 300 = 182.400 vnd

This introductory general ecology text features a strong emphasis on helping students grasp the main concepts of ecology while keeping the presentation more applied than theoretical. An evolutionary perspective forms the foundation of the entire discussion. The book begins with the natural history of the planet, considers portions of the whole in the middle chapters, and ends with another perspective of the entire planet in the concluding chapter. Its unique organization of focusing only on several key concepts in each chapter sets it apart from the competition.


34.Electricity: Principles and Applications / Richard J. Fowler

New York: McGraw Hill, 2003.

528 trang x 300 = 158.400 vnd


This widely-used text prepares students for entry-level jobs in electronics, electrical trades and related fields. Its level and approach are ideal for both electronics and electricity programs looking for a relatively short, applied book covering DC/AC circuits. Additional chapters on topics such as safety, transformers, motors, instrumentation, and residential wiring are also included. No prior knowledge of electricity is assumed; the only prerequisites are arithmetic and basic algebra. Practical skills are emphasized throughout the text, and supported in the hands-on work provided in the companion Experiments Manual. MultiSim circuit files are provided, on a bound-in CD ROM, for those who want to bring software simulation work into their classes and labs.

35. Elementary Statistics: A Step by Step Approach / Allan G. Bluman

New York: McGraw-Hill, 2007.

 943 trang x 300 = 282.900 vnd

Elementary Statistics: A Step By Step Approach is for introductory statistics courses with a basic algebra prerequisite. The book is non-theoretical, explaining concepts intuitively and teaching problem solving through worked examples and step-by-step instructions. In recent editions, Al Bluman has placed more emphasis on conceptual understanding and understanding results, along with increased focus on Excel, MINITAB, and the TI-83 Plus and TI-84 Plus graphing calculators; computing technologies commonly used in such courses.


36. Engineering Mechanics./ Statics / R. C. Hibbeler

Upper Saddle River, N.J.: Pearson/Prentice Hall, 2001.

672 trang x 300 = 201.600 vnd


In his substantial revision of Engineering Mechanics, R.C. Hibbeler empowers students to succeed in the whole learning experience.  Hibbeler achieves this by calling on his everyday classroom experience and his knowledge of how students learn inside and outside of lecture.

In addition to over 50% new homework problems, the twelfth edition introduces the new elements ofConceptual ProblemsFundamental Problems and MasteringEngineering, the most technologically advanced online tutorial and homework system.


37.Financial Accounting/ [Electronic resources] / Robert Libby, Patricia A. Libby, Daniel G. Short

Boston, Mass.: McGraw-Hill, 2007.

 896 trang x 300 = 268.800 vnd

Robert Libby is the David A. Thomas Professor of Management at the Johnson Graduate School of Management at Cornell University, where he teaches the introductory financial accounting course. He previously taught at the University of Illinois, Pennsylvania State University, University of Texas at Austin, University of Chicago, and University of Michigan. He received his B.S. from Pennsylvania State University and his M.A.S. and Ph.D. from the University of Illinois; he is also a CPA. Bob is a widely published author specializing in behavioral accounting. He was selected as the AAA Outstanding Educator in 2000. His prior text, Accounting and Human Information Processing (Prentice Hall, 1981), was awarded the AICPA/AAA Notable Contributions to the Accounting Literature Award. He received this award again in 1996 for a paper. He has published numerous articles in the Journal of Accounting Research; Accounting, Organizations, and Society; and other accounting journals. He is past Vice President-Publications of the American Accounting Association and is a member of the American Institute of CPAs and the editorial boards of The Accounting Review; Accounting, Organizations, and Society; Journal of Accounting Literature; and Journal of Behavioral Decision Making.

Patricia Libby is Chair of the Department of Accounting and Associate Professor of Accounting at Ithaca College, where she teaches the undergraduate financial accounting course. She previously taught graduate and undergraduate financial accounting at Eastern Michigan University and the University of Texas. Before entering academe, she was an auditor with Price Waterhouse (now PricewaterhouseCoopers) and a financial administrator at the University of Chicago. She received her B.S. from Pennsylvania State University, her M.B.A. from DePaul University, and her Ph.D. from the University of Michigan; she is also a CPA. Pat conducts research on using cases in the introductory course and other parts of the accounting curriculum. She has published articles in The Accounting Review, Issues in Accounting Education, and The Michigan CPA. She has also conducted seminars nation-wide on active learning strategies, including cooperative learning methods.

Dan Short is the Dean of the M.J. Neeley School of Business at Texas Christian University in Fort Worth, TX. Prior to that he was Dean at Richard T. Farmer School of Business at Miami University and Dean of the Business School at Kansas State University. Before entering adminstration, Dan taught at the University of Texas-Austin and the University of Chicago. He received his Ph.D. from the University of Michigan. He has won numerous teaching awards during his career teaching both undergraduate and MBA financial accounting courses.


38.Fundamental Manufacturing Processes/ [Electronic resources]: Basics of Grinding / Society of Manufacturing Engineers.

U.S.: SME., 2003.

 Video = 200k


39.Fundamental Manufacturing Processes/ [Electronic resources]: Holemaking / Society of Manufacturing Engineers.

U.S.: SME., 2009

 Video = 200k

This video details the holemaking process, showing what types of drills are used for different applications and several different finishing operations for the holemaking process. Also covered is the basic theory and practice of holemaking, and demonstrations of the holemaking process, various drills, holemaking machines, operating parameters in holemaking, and hole finishing operations.

  • Actors: instructional program. No actors
  • Directors: Society of Manufacturing Engineers
  • Format: NTSC
  • Region: Region 1 (U.S. and Canada only. Read more about DVD formats.)
  • Number of discs: 1
  • Studio: Society of Manufacturing Engineers
  • DVD Release Date: September 1, 1995
  • Run Time: 24 minutes
  • Average Customer Review: Be the first to review this item

40.Fundamental Manufacturing Processes/ [Electronic resources]: Milling and Machining Centers / Society of Manufacturing Engineers.

U.S.: SME., 2009.

 Video = 200k

Fundamental manufacturing processes [electronic resources]
Society of Manufacturing Engineers
Publication Information:
Dearbon, MI : Society of Manufacturing Engineers, 2001
Physical Description:
1 videocassette (26 min.) : sd., col. ; 7 1/2 in.+ 8 computer optical disc (4 3/4 in.)
v. 1. Cutting tool materials — v. 2 Milling and machining center basics — v. 3 Turning and lathe basics — v. 4 Basics holemaking — v. 5 Basics of grinding — v. 6 Introduction to workholding — v. 7 Threading basics — v. 8 Cutting tool
Subject Term:
Manufacturing process
Added Corporate Author:
Society of Manufacturing Engineers

41.Fundamental Manufacturing Processes/ [Electronic resources]: Turning & the Lathe / Society of Manufacturing Engineers.

U.S.: SME., 2009.

The lathe is one of the most versatile machine tools, capable of many diverse operations. This program will show you how to operate a lathe properly and efficiently. It will show you the basics of lathe applications and the variety of lathes available. The program shows the basic parts of an engine lathe, workholding arrangements, tooling arrangements and the process variables.

  • Directors: Society of Manufacturing Engineers
  • Format: Color, NTSC
  • Number of tapes: 1
  • VHS Release Date: August 18, 1995
  • Run Time: 24 minutes
  • Average Customer Review: Be the first to review this item
  • ASIN: 0872635813

42.Fundamentals of Applied Electromagnetics / Fawwaz T. Ulaby

Upper Saddle River, N.J.: Pearson/Prentice Hall, 2001.

 528 trang x 300 =  158.400 vnd

KEY BENEFIT: Widely acclaimed both in the U.S. and abroad, this reader-friendly yet authoritative volume bridges the gap between circuits and new electromagnetics material. Ulaby begins coverage with transmission lines, leading readers from familiar concepts into more advanced topics and applications.
KEY TOPICS: Introduction: Waves and Phasors; Transmission Lines; Vector Analysis; Electrostatics; Magnetostatics; Maxwell’s Equations for Time-Varying Fields; Plane-Wave Propagation; Reflection, Transmission, and Waveguides; Radiation and Antennas; Satellite Communication Systems and Radar Sensors.
MARKET: A useful reference for engineers.


43.Fundamentals of Structural Mechanics / Keith D. Hjelmstad

New York: Springer Science, 2005.

 494 trang x 300 = 148.200 vnd

From the Publisher

This readable, student-friendly text responds to the pedagogical needs created by the advent of computational mechanics by focusing more upon formulations and fundamental principles and less upon classical solution techniques. It covers three main areas–(1) the fundamental principles of continuum mechanics, (2) the theories of beams and plates, and (3) static stability theory–with three unifying strands connecting them–(1) a direct vector notation, (2) the principle of virtual work (or variational calculus), and (3) a unified approach to numerical computation. –This text refers to an out of print or unavailable edition of this title.

From the Back Cover

Key Benefit: This book fills the gap created by the advent of computational mechanics by focusing more upon formulations and fundamental principles and less upon solution techniques. Key Topics: It covers three main areas—(1) the fundamental principles of continuum mechanics, (2) the theories of beams and plates, and (3) static stability theory—with three unifying strands connecting them—(1) a direct vector notation, (2) the principle of virtual work (or variational calculus), and (3) a unified approach to numerical computation. –This text refers to an out of print or unavailable edition of this title.

44.Introduction to Food Engineering / R. Paul Singh, Dennis R. Heldman

San Diego: Academic Press, Inc., 2001.

 538 trang x 300 vnd = 

The fourth edition of this leading textbook presents the engineering concepts and unit operations used in food processing in a classroom-proven and unique blend of principles with applications. Describing the application of a particular principle followed by the quantitative relationships that define the related processes, each chapter also includes solved examples and problems to evaluate reader comprehension.

Authors Singh and Heldman use their many years of teaching to present food engineering concepts in a logical progression that covers the standard course curriculum making it easily adaptable for each classroom.

- Supplemental Processes
- Filtration
- Sedimentation
- Centrifugation
- Mixing
- Extrusion Processes for Foods
- Packaging Concepts
- Shelf Life of Foods
- Transport of granular foods and powders
- Process controls and measurements
- Emerging technologies such as high pressure and pulsed
- Electric field Design of plate heat exchangers
- Impact of fouling in heat transfer processes
- Use of dimensional analysis in solving problems
* Author Web site with animated versions of figures
* Examples throughout each chapter, presented in “Given – Approach – Solution” format for clear presentation of key concepts
* End of Chapter Problems to assess comprehension
* List of Symbols
* “Advanced” level questions called out in a separate section
Key equations highlighted
* Written to follow the typical Food Engineering course, making it easily adaptable for each classroom


45.Micro/ Nano Replication: Processes and Applications / Shinill Kang

Hoboken, N.J.: Wiley, 2012.

388 trang x 300 = 1116.400 vnd

This book is an introduction to the fundamentals and processes for micro and nano molding for plastic components. In addition to the basics, the book covers applications details and examples. The book helps both students and professionals to understand and work with the growing tools of molding and uses for micro and nano-sized plastic parts.

  • Provides a comprehensive presentation on fundamentals and practices of manufacturing for micro / nano sized plastics parts
  • Covers a relatively new but fast-growing field that is impacting any industry using plastic parts in their products (electronics, telecommunications, biomedicine)
  • Presents fundamentals and applications for both advanced students and professionals
  • Presents the strengths and weaknesses of molding processes
(Còn tiếp)
 ttadv2 Hơn 200 học viên thành thạo mỗi tháng, bạn cũng tham khảo xem thế nào nhé:

Biểu học phí và lịch khai giảng các khóa học CAD CAM tháng này lichkhaigiang Quyền lợi học viên:
  • Giảm 10% khi đăng ký khóa thứ 2
  • Giảm 20% khi đăng ký tiếp khóa thứ 3 trở đi
  • Được dạy bởi giảng viên có kinh nghiệm sư phạm và kinh nghiệm thực tế liên quan
  • Phụ đạo thêm ngoài giờ cho học viên mất tiết, không theo kịp chương trình.
  • Tặng giáo trình màu
  • Hỗ trợ file cài và cài đặt phần mềm miễn phí
  • Cấp chứng nhận hoàn thành khóa học miễn phí
  • GIới thiệu việc làm sau khi học xong.
  • Giảm 100.000 vnd cho học viên có  Laptop

    Giảm 200.000đ học phí + áo thun (150k) ( trừ autocad) cho 5 bạn đầu tiên khi đăng ký trong hôm nay.
  • dang-ky-cad-camƯu đãi khi ĐK trước khai giảng 10 ngày:
    • Tặng áo thun trị giá 150.000 vnd và bộ giáo trình nâng cao trị giá 300.000 đ
    • Giảm 50% khi mua tài liệu chuyên ngành trên www.cachdung.com
    CN1:Bình Thạnh,HCM- CN2:Tân Bình,HCM- CN3:Bình Tân,HCM- CN4:Thủ Đức,Biên Hòa- CN5:Thủ Dầu Một,Bình Dương- CN6: Đống Đa, Hà Nội- Và nhiều xưởng thực hành
  • Chi tiết liên hệ và bản đồ từng chi nhánh-> Click Here
Dạy tại công ty: không giới hạn học viên.  Theo giáo trình trung tâm 10tr, Theo yêu cầu riêng: 15 tr 


  • Học kèm, Online, gia sư tận nhà, học không giới hạn thời gian, học liên tục với lịch học bất kỳ: Từ 14h00-21h00( Giảm 50% học phí cho SV)
  • Phù hợp: Người ở nước ngoài, bận rộn, nền tảng kỹ thuật yếu, ngành khác, chủ doanh nghiệp, cần học gấp, muốn thành thạo
Autocad Solidworks Mastercam CNC ProE/Creo Inventor NX Catia
980k 2,980k 3.880k 4.380k 3.880k 2,980k 3.880k 3.880k
Quyền lợi:
  • + Xếp lớp ngay sau khi đăng ký, không chờ đợi.
  • + Bổ sung nền tảng công nghệ cơ khí cho người mất gốc
  • + Học tới khi thành thạo
  • + Hỗ trợ việc làm sau khi tốt nghiệp
  • + Sắp xếp giảng viên tốt nhất
  • + Tất cả quà tặng của lớp học theo lịch và kèm theo:
  • + Một  trong ba khóa học nền tảng miễn phí: ( 5 buổi)
  • 1.Đọc hiểu bản vẽ kỹ thuật
  • 2. Công nghệ gia công cơ khí truyền thống và hiện đại
  • 3. Trình bày bản vẽ đúng tiêu chuẩn ( Nhật, ISO)
  • + Áo thun trị giá 150.000 vnd
 Giảm 300.000đ học phí ( trừ autocad) khi đăng ký lớp Chuyên Gia trong hôm nay.

Sorry, the comment form is closed at this time.

Cung cấp dịch vụ tối ưu cho cá nhân và doanh nghiệp vừa và nhỏ